0941 827 888 Thứ 2-7 : 8-20H;
Chủ nhật : 8-17H
  [email protected] Trả lời 30' trong giờ hành chính  


Mật khẩu
Trang chủ
TGI-200N to TGI-250kN - Technograph TGI series
Giá bán: 0 VNĐ/cái
Số lượng
Giá thị trường: 0 VNĐ /cái Tiết kiệm: 0.0 %


  • New Desk-Top testing mashine with high accuracy, high performance, and simple operation.
      High Accuracy
    Accuracy of ±1 % (JIS Class 1) of the indicated value from 1/1 to 1/1000 of load cell capacity, accurac of ±0.5% (JIS Class 0.5) is available as an option.
    Cross head speed range of 0.000 5 mm/min to 1 000mm/min (TGI-50kN to TGI-250kN : 0.000 5mm/min to 500mm/min). 
    Accuracy of cross head speed is ±0.1 % of speed setting over entire speed range.
      High performance with simple operatin.
    Automatic load cell span adjustment, One-push auto zero, Auto return to test start position (No overshooting), Test condition registration, Manual 3 level speed setting (freely settable), Analog output of test force and position, and support for continuous repeated tensile and compression testing.
      Increased accuracy, with servo motor resolution four times greater than previous models. Position control is greatly improved, allowing steady operation in low speed ranges.
      Increased return speed
    The return speed can be set as desired between 0.1 mm/min and 1500 mm/min (up to 10kN) and between 0.1 mm/min and 750mm/min (for 50kN and over).
Model TGI-250kN TGI-100kN TGI-50kN TGI-10kN TGI-5kN TGI-1kN TGI-500N TGI-200N
Maximum test force 250 kN 100 kN 50 kN 10 kN 5 kN 1 kN 500 N 200 N
Test force measure -ment range *1) 0.1N~
Test space Tensile / compression testing beneath the movable crosshead. 
(A model is available allowing tensile testing above the movable crosshead (Optional).)
Loading method Constant-speed strain loading with highly accurate AC servo motor and backlash-free precise ball screw.
Cross head speed / permissible test force Within the max. test force over the entire speed ranges.
Test force range 2 methods:
AUTO: (accuracy guranteed for 1/1 to 1/250 of load cell capacity)
100: (accuracy guranteed for 1/100 to 1/1 000 of load cell capacity)
Test force display 5-digits digital display ±99,999
AUTO range: Resolution 1/5000, test force reduction increase/decrease, Full scale display, and automatic switching of decimal point position and display unit.
100 range: Resolution 1/10000
* Test force display varies depending on the load cell provided.
Test force measuring accuracy (Guaranteed accuracy range) Standard accuracy : ±1 % of indicated value 
(1/1 to 1/1000 of load cell capacity) 
High accuracy : ±0.5% of indicated valeu (Optional) 
(1/1 to 1/1000 of load cell capacity)
* Test machine must be in location free of vibration
Applicable standard JIS B 7721 Class 1 or Class 0.5 and ISO7500-1 Class 1 or Class 0.5
Effective test width (Note 2) (mm) 600 600 420 430
Cross head stroke (mm) 1 550 1 350 1 015 1 090
Maximum mounting space (mm) 1 690 1 555 1 165 1 160
Tensile stroke (Note 3) (mm) 620 850 470 710 820 870 890 910
Crosshead speed 0.000 5 to 500 mm/min
0.1 to 500 mm/mincan be set in 0.1 mm/min incliments. Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.
0.000 5 to 1 000 mm/min
0.1 to 1 000 mm/min; can be set in 
0.1 mm/min increments. Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.
Crosshead speed accuracy ±0.1 % over entire speed range
Return speed Can be set as required between 0.1 mm/min and 750 mm/min Can be set as required between 0.1 mm/min and 1 500 mm/min
Speed setting method Manual: Numeric input via control panel
When using data processing software: Automatically set in accordance with test conditions created.
Manual speed 3 speeds (HIGH/MIDDLE/LOW); each freely settable
Test mode Single and cycle (Combination of test force and position)
Optional: Creep, Automatic loading
Test force display 5 digit digital display ±99 999
Auto range: Resolution 1/5 000, test force reduction increase/decrease, full scale display, and automatic switching of decimal point position and display units
100 range: Resolution 1/10 000 * Test force display varies depending on the load cell provided.
Movable crosshead position display 6 1/2-digit digital display ±1999.999
Standard function
Load cell model & capacity

Auto adjust
Load cell span

Auto set for tension & compression

Zero point

One push
Position reset One push
Sample rupture detection

Selectable from stop, reverse and ignore
Rupture sensitivity

Set as desired to 0.04 % to 99.00 % of test force
Test condition registration function

10 conditions
Test force & position analog output

DC0 ~ DC5 V (with scaling function)

Conforms to USB interface 2.0/1.1 standard (B- type connector)
Chuck adapter

Lower chuck mounting adapter for tensile testing
Load cell

for tension / compression type 
(with universal joint, connect pin and compression plate
for tensile type
(with universal joint and connecting pin)
for compression type
(with for compression plate)

Testing jig

Former jig is attachable.
Displacement measuring function

Strain input type
Test machine stand
Data processing software

Standard (Tensile / compression / bending), Peeling, Cycle (One way, Both way), 
Stress relaxation
External dimensions (WxHxD)(mm) 1420 x 2406 x 894 1221 x 2192 x 720 900 x 1507 x 490 700 x 1583 x 523 700 x 1 583 x 513
(without level adjuster)
Approximate weight (kg) 1 200 900 310 120
Power supply voltage, Frequency 3-phase AC200 V to 230 V+10 % to 15 %, 50/60 Hz Single phase AC100 V to 115 V+10% to -15%, 50/60 Hz
Power consumption (W) 7.5 k 2.9 k 1.8 k 750 400
Operating temperature / humidity range Temperature 5 ℃ ~ 40 ℃, 
Humidity 20 % ~ 80 %RH (with no condensation)
  • Note 1: Test force measurement range varies depending on the rated capacity of load cell used.
  • Note 2: Testing machines are available with large effective width for models with maximum test force of 50 kN, 100 kN or 250 kN.
    Note 3: Models are available with extended stroke.
(*) là thông tin bắt buộc
24/02/2024 22:31:57
Kid's Air Jordan 12 Retro Shoes 153265-071 -
24/02/2024 21:41:59
|It is not important to be perfect when fashion is involved. Firstly, there is no such thing as perfection in this world. Also, if you try too hard, you may look uptight. Disheveled looks with messy hair, non-matching shoes, or not completely buttoned pieces like those of Kate Moss can look great. Kid's Air Jordan 12 Retro Shoes 153265-071 -
24/02/2024 21:41:57
|On a hot summer's day, wearing your hair up can be fashionable and functional. Long, loose hair can get in the way during work or play. If you do not have time for a more elaborate style, just pull it into a cute bun.
Women's Air Jordan XXXVII Low Basketball Shoes DQ4122-061
24/02/2024 21:41:54
|If you have problem with frizzy hair, do not use a towel to rub your hair after shampooing. You will just damage your hair and make it frizz more when you do this. You are just going to want to cover it with a towel and push down to get moisture off. When you are happy, brush and comb your hair. Women's Air Jordan XXXVII Low Basketball Shoes DQ4122-061
24/02/2024 20:10:04 http://19gra
Load Test Stand LTS-50NB / LTS-200NB / LTS-500NB / LTS-1kNB
Compression and Tensile Testing Machine TG series
Technograph TGE series