|
Model |
TG-250kN |
TG-100kN |
TG-50kN
TG-20kN |
TG-10kN
TG-5kN
TG-2kN |
TG-1kN
TG-500N |
Maximum test force |
250 kN |
100 kN |
50 kN
/ 20 kN |
10 kN /
5 kN / 2 kN |
1 kN
/ 500 N |
Test force measure -ment range
(Note 1) |
0.1 N ~ 250 kN |
0.1 N ~ 100 kN |
0.1 N ~ 50 kN
0.1 N ~ 20 kN |
0.1 N to 10 kN
0.1 N ~ 5 kN
0.1 N ~ 2 kN |
0.1 N ~ 1 kN
0.1 N ~ 500 N |
Test space |
Tensile/compression testing beneath the movable crosshead
(A model is available allowing tensile testing above the movable crosshead. (Optional)) |
Loading method |
Constant-speed strain loading with high-accuracy AC servo motor and backlash-free precision ball screw. |
Crosshead speed /permissible
test force |
Within the max. test force over the entire speed range. |
Test force measuring accuracy |
±1% of indicated value in range 1/1 to 1/500 of load cell capacity for both tensile and compression
(A high-accuracy model with ±0.5% of indicated value is available as an option.)
Applies to load cell with rated output of 3 mV/V |
Applicable standards |
JIS B 7721 Class 1 or Class 0.5 and ISO7500-1 Class 1 or Class 0.5 |
Effective test width (Note 2) (mm) |
600 |
600 |
420 |
420 |
300 |
Crosshead stroke (mm) |
1 550 |
1 350 |
1 010 |
895 |
770 |
Maximum mounting space *3) (mm) |
1 690 |
1 555 |
1 155 |
1 030 |
925 |
Tensile stroke (Note 4) (mm) |
620 |
850 |
460/540 |
545/655
/655 |
550/570 |
Crosshead speed
[standard model]
[Extended speed range model] (mm/min) |
0.05 to 500 17 steps
0.005 to 500 21 steps |
0.05 to1 000 18 steps
0.005 to1 000 22 steps |
Crosshead speed accuracy (Note 5) |
±0.1% over entire speed range
(Excluding custom and manual speed) |
Test force/crosshead position display |
Test force: 5-digit digital display.
Movable crosshead position: 5 1/2-digit digital display ±199999 |
Crosshead position display accuracy |
±0.1% of indicated value. (±0.01 mm up to ±10 mm) |
Cycle count display |
4-digit digital display, selection display on position display |
Cycle control
(Note 6) |
Position setting, test force setting, and combined setting possible.
With cycle number preset function. |
Return function |
Test speed or rapid return speed (customer setting) can be selected.
With zero-overshoot function (stops at position [0]) |
Sample rupture detection function |
Sensitivity can be set as desired.
(Can be set to stop movable crosshead, reverse, or ignore on detection.) |
Test force
amplifier |
(Measurement scale) |
:
|
Seven steps: ×1, ×2, ×5, ×10, ×20, ×50, ×100
(Auto range function: optional) |
Auto zero |
:
|
Provided (2 modes: All range auto zero and Set range auto zero)
|
Calibration |
:
|
Automatic calibration using data registration |
|
Outline dimensions
(W x H x D)(mm) |
1 400 x 2 450
x 894 |
1 172 x 2 192
x 720 |
795 x 1 515
x 495 |
760 x 1 345
x 370 |
620 x 1 183
x 370 |
Weight(Approx. kg) |
1 200 |
900 |
310 |
130 |
70 |
Power supply |
3-phase AC200 V±20 V |
1-phase AC100 V±10 V
(TG-10kN : 3-phase AC200 V±20 V) |
Power consumption
(W) |
7 k |
5 k |
1.5 k |
400
(TG-10kN : 750) |
200 |
Operating temp. /humidity range |
Temperature 5 ℃ to 40 ℃, Humidity 20 % to 80 %RH
(with no condensation) |
- Note 1: The test force measurement range varies depending on the rated capacity of the load cell used.
Note 2: Testing machines are available with large effective width.
Note 3: Models are available with extended stroke.
Note 4: Tensile testing stroke is for maximum test force capacity load cell with the (optional) chuck mounted.
Note 5: Extended speed range crosshead speed accuracy is the accuracy in the range 0.05 to 500 mm/min.
Note 6: Use a reciprocating speed not exceeding 3 cycles/min for cycle testing.
|