VN EN
 
  0941 827 888 Thứ 2-7 : 8-20H;
Chủ nhật : 8-17H
 
 
  [email protected] Trả lời 30' trong giờ hành chính  

 

Email
Mật khẩu
Trang chủ
5940 Series - Systems for Low-Force Mechanical Testing
Giá bán: 0 VNĐ/cái
Số lượng
Giá thị trường: 0 VNĐ /cái Tiết kiệm: 0.0 %

Overview

5940 Single Column Tabletop Testing Systems are universal, static testing systems that perform tensile and compression testing; and also perform shear, flexure, peel, tear, cyclic, and bend tests. The 5900 Series are engineered for precision, built for durability, and offer the flexibility for changing requirements.They are designed with standard and optional features that increase testing efficiency and improve the testing experience for the operator. Single column frames are commonly used for medical devices and biomaterials, textiles, elastomers, food, small components and microelectronics, wire, paper, and plastic film.

Two key advantages of 5940 single column systems are their small footprint and frame stiffness. The small footprint of the 5942, 5943, and 5944 saves valuable laboratory space, which is an important consideration when purchasing a testing instrument. The superior stiffness and alignment of the 5900 load frames ensures precise alignment when testing everything from biomaterials to wire or plastic film. The rigid mechanical design guarantees the best possible conditions for repeatable test conditions and reliable results.

Features

  • Load measurement accuracy: +/- 0.5% of reading down to 1/1000 of load cell capacity option (2580 Series load cells)
  • Up to 2.5 kHz data acquisition rate option simultaneous on load, extension, and strain channels
  • Speed range of 0.05 - 2500 mm/min (0.002 - 100 in/min)
  • Customizable Control Panel
  • Compatible with Bluehill® Software
  • Automatic transducer recognition for load cells and extensometers
  • Small footprint saves space
  • Thousands of optional grips and fixtures
  • Full CE compliance

Range of Models

5942

  • 0.5 kN (112 lbf) capacity
  • 726 mm (28.6 in) vertical test space*


5943

  • 1 kN (225 lbf) capacity
  • 1123 mm (44.2 in) vertical test space*


5944

  • 2 kN (450 lbf) capacity
  • 1123 mm (44.2 in) vertical test space*

*Total vertical test space is the distance from the top surface of the base platen to the bottom surface of the moving crosshead, excluding load cell, grips, and fixtures.

Note: specifications are subject to change without notice.

(*) là thông tin bắt buộc
(*)
(*)
(*)
kobe byrant shoes
19/05/2021 02:27:56
I precisely wanted to thank you very much all over again. I do not know the things that I might have taken care of without the actual tactics shown by you on that situation. It has been the horrifying scenario for me, but seeing a specialised tactic you dealt with the issue made me to jump with fulfillment. Extremely thankful for the support and as well , wish you comprehend what a powerful job you are doing educating the others thru a site. More than likely you have never got to know any of us.
nike off whtie
17/05/2021 10:44:31
I have to show some thanks to the writer just for bailing me out of this particular situation. Right after exploring through the world wide web and meeting proposals which were not productive, I believed my life was gone. Existing minus the strategies to the problems you have sorted out as a result of your entire article content is a serious case, as well as the kind which may have negatively damaged my career if I had not come across your site. Your good expertise and kindness in maneuvering th
Qwjpfo
17/05/2021 06:26:32
recreational usage of ed pills - good pill for helping with mens ed oval pill with ed
Curved Needle
0 VNĐ
Torsion Add-On
0 VNĐ
MicroTester Precision Instruments for Small-Scale Testing
0 VNĐ
Systems for High-Capacity Universal Testing
0 VNĐ
Systems for Tensile, Compression, Flexure, Peel testing
0 VNĐ
Universal Testing Systems
0 VNĐ
Universal Testing Systems
0 VNĐ
Universal Testing Systems
0 VNĐ