orque Gauges/Torque Testers

Torque Gauge Enables To Measure Turning /Twisting Force.

A Torque Gauge is as the name, a measuring instrument of Torque (= Force x Distance). It is used for a variety of turning, twisting or rotating force measurements such as a check of screw fasten torque, bottle opening/closure test, durable twist test of PCB etc. →See the applications of torque measurement.

IMADA torque gauges and torque testers provide accurate torque measurement results. The highest sampling speed 2000 data/sec is ideal for capturing accurate peak torque in both direction (CW/CCW). In addition, the torque transition is able to be drawn into a graph at 2000 data/sec with an optional software.  The detailed torque analyses are possible (Depending on the torque gauge and torque tester).  Also, IMADA has a lot of types of torque gauge attachments. They enable various torque measurements and offer the suitable measurement for your needs.

*When you need to measure Torque and Angle at once.→ See Torque-Angle Measurement Unit

Torque Gauges (Torque Testers) and Torque Gauge Attachments

Torque Gauge (Torque Tester)

Screw Cap Torque Tester

DTXS/DTXA series

This screw cap torque tester is ideal for  measurements of bottle opening, key locking, lip stick twisting, etc. The 2000 Hz sampling rate captures accurate torque. The capacity is from 2N-m(200N-cm) to 10N-m(1000N-cm).

Handheld Type Digital Torque Gauge

HTGS/HTGA series

It is a portable type torque gauge. You can carry it and measure torque wherever you want. It is able to measure torque tightening a screw, turning a rotary switch etc. The capacity is from 50N-cm to 10N-m(1000N-cm).

Torque Stand

Motorized Torque Stand

MTS series

This torque stand is used with DTXS/DTXA series. It improves your torque measurement repeatability by the motorized uniform rotation. It is also possible to apply specified torque for set time and to repeat reciprocate rotations.

Torque Meter

Driver Torque Meter　

I-8/I-80

This driver torque meter is ideal for the daily torque maintenance of motor screw drivers and torque drivers. It is possible to use by simple operations. The capacity is from 8 kgf-cm to 80 kgf-cm.

Torque Gauge and Torque Stand Attachment

Pin Chuck

HT-DC/DT-DC/MT-DC series

The 3 jaw chuck is ideal for torque measurements gripping a thin sample such as a wire and a pin.

9.5 Socket Holder

HT-9.5SQ

Measurements for fasten/loosen torque of a bolt and others by mounting various shape sockets.

Torque Driver

HT-DBH

Measurements for fasten/loosen torque of a screw.

M10 Adapter

HT-AD-M10

The adapter is used for mounting your original fixture on HTGS/HTGA/eHT.

MTS series Upper Chuck

MT-TB

The upper chuck for Motorized Torque Stand MTS series.

Torque Gauge Table

Small Table

HT-ST/DT-ST/MT-ST

The small table for HTGS/HTGA, DTXS/DTXA and MTS series. It holds φ7~50mm sample.

DTSX/DTXA series Standard Table

DT-TB

Standard Table for DTXS/DTXA series. It holds φ20~160mm sample.

Torque Gauge Optional Item

Sensor Holder

SHT-5N

A simple torque stand for stable torque measurements. It holds HTGS/HTGA/eHT sensor vertically or horizontally …..

Sample Stage

TB-SP

The stage is useful for stable sample setting for a container. It puts on DTXS/DTXA series Standard Table.