Example of report |
■ |
Quick start function (30 conditions) |
| |
Registering frequently used test conditions allows you to move to the test start screen with just one click.
The display can be switched between Japanese and English. |
| ■ |
Improved report creation function |
| |
Allows titles, test conditions, test samples, graphs (2 types), results, comments, and photographs to be pasted in any location with any size to create reports. |
| ■ |
Sampling rate and test speed can be switched in up to four stages during testing in standard sampling mode. |
| |
Sampling rate: Can be set between 10 ms and 10 hours in 10 ms intervals.
Displacement: Can be set between 0.001 mm and 1,000.000 mm in 0.001 mm intervals |
| |
■ |
With high-speed sampling (optional), this can be switched in up to
three stages during testing. |
| |
|
High-speed sampling of 1 ms, 5 ms, 10 ms, 50 ms, 100 ms or 150 ms can be set in up to three stages. |
| |
■ |
Additional tests and results can be reordered. |
| |
■ |
Supports tensile, compression, 3-point/4-point bending, and peeling in a single package. |
| |
|
Control conditions can also be created by the user for creep testing, relaxation testing, and automatic load testing. |
| |
■ |
The test of tension, compression, 3 points/4 points bend and peel are totalized in the package. Moreover, the control condition of creep test, relaxation test and automatic load test can be created for yourself. |
|
| Testing types |
Tensile, compression, 3-/4-point bending, peeling |
| Test modes |
Single (tensile, compression, 3-/4-point bending, peeling)
Cycle (tensile, compression, 3-/4-point bending) (Optional)
Control (tensile, compression, 3-/4-point bending) (Optional) |
| Max test capacity |
100 batches, 100 sub-batches (max. 10,000 tests per file)
* Cycle testing fixed at 1 batch, 1 sub-batch. |
| Sampling interval |
Standard 10 ms to 10 h, High-speed 1 ms to 150 ms |
| Analysis items |
|
Tensile, compres
-sion, 3-/4-point bending testing |
Displacement origin, elastic modulus (standard, chord, gradient), peak,
rupture point, upper yield point, lower yield point, yield strength point,
intermediate point (6 points each for test force and displacement),
energy, initial tensile resistance, [n] value, rupture elongation |
| Peeling testing |
Displacement origin, 1st peak point, 1st bottom point, maximum peak
point, minimum bottom point, intermediate point (1 to 6 points),
intermediate test force point (1 to 6 points), mean of intermediate test
force point (2 to 6 points), tearing strength,
integral/simple/peak/bottom/peak & bottom/large & small peak 6-point
mean, static/dynamic coefficient of friction, collection mean. |
| Cycle test |
Displacement origin, maximum point, minimum point, maximum return
point, minimum return point, intermediate point (6 points each for test
force and displacement), energy (increase/decrease, positive/negative,
cycle), hysteresis, hysteresis loss, residual elongation. |
| Other functions |
Test condition quick start, preliminary cycle, automatic test force cancel,
original point detecting function. |
|
Danh mục sản phẩm
