VN EN
 
  0941 827 888 Thứ 2-7 : 8-20H;
Chủ nhật : 8-17H
 
 
  [email protected] Trả lời 30' trong giờ hành chính  

 

Email
Mật khẩu
Trang chủ
DSC 204 F1 Phoenix® - Thermal Analysis
Giá bán: 0 VNĐ/cái
Số lượng
Giá thị trường: 0 VNĐ /cái Tiết kiệm: 0.0 %
  1. DSC 204 F1 Phoenix®

    The premium DSC for all requirements

     

    The versatile Premium Differential Scanning Calorimeter, DSC 204 F1 Phoenix®, fascinates with its unique concept: all essential operational components are integrated into the instrument and optional add-ons can be installed anytime on site. 

    The DSC measuring cell consists of a cylindrical high-conductivity silver block with an embedded heating coil for broad thermal symmetry (3D symmetry) in the sample chamber, the cooling ports for liquid nitrogen or compressed air cooling and a cooling ring for connection of the intracooler (also with simultaneous liquid nitrogen cooling). The gas-tight construction and integrated mass flow controllers for the purge and protective gases allow coupling to an FT-IR or MS for gas analysis.

     

    Request InformationData SheetBrochure

    Accessories Catalogue

     

    Tau-sensorTau-sensor

     

    Exchangeable sensors are tailored to their tasks:

    With its disk-shaped silver carrier plate and supersensitive thermosensors of nickel-chromium constantan, the Tau-sensor offers a high level of calorimetric sensitivity along with extremely short signal time constants of only 0.6 seconds, which guarantees good separation of overlapping thermal effects.

    The µ-sensor stands out for its high level of calorimetric sensitivity, never before achieved with a Differential Scanning Calorimeter, DSC. For example, it is extremely well suited for pharmaceutical applications with small sample weights.

     

    µ-sensorµ-sensor

    More on the Functional Principle of a Heat-Flux DSC


     

    Key Technical Data

    (subject to change)

     

  2. Temperature range:
    -180°C to 700°C
  3. Heating rates:
    0.001 K/min to 200 K/min
  4. Cooling rates: 
    max. 200 K/min
  5. Compressed air cooling:
    RT to 700°C
  6. Intracooler for the extended range: 
    -85°C to 600°C
  7. Automatically controlled LN2 cooling: 
    -180°C to 700°C
  8. Indium Response Ratio (*): 
    >/100 mW/K
    (*) Peak Height [mW]/Peak with at 50% Height [K] of Indium melting peak
  9. Gas control for 2 sample gases and 1 protective gas through integrated mass flow controller and software
  10. Automatic sample changer: 
    for 192 samples and reference crucibles (optional)

 

DSC 3500 Sirius

 

A wide range of crucibles (pans) (aluminum, platinum, stainless steel for pressure applications, etc.) is available for nearly all possible applications and materials. 

For the sealing press exchangeable inserts are available, for all cold-weldable aluminum crucibles/pans and stainless steel crucibles (pans) for pressures up to 20 bar (Photo). 

The 3in1 Box comes exclusively with the new Concavus® pan by NETZSCH. It offers comprehensive protection during transport and storage, allows for easy withdrawal and features a unique archiving system for the pans following measurement.

The automatic sample changer DSC 204 F1 Phoenix®-ASC is designed for routine measurements. It works day and night, giving you time for other tasks, and provides for optimal use of the DSC 204 F1 Phoenix® (e.g. calibrations on the weekend).

 

The DSC system with an automatic sample changer can handle up to 192 crucibles/pans evenly distributed on two removable trays. Different types of crucibles/pans are allowed up to 8 mm Ø in and 8 mm in height. A four-needle gripper handles different crucibles by using the appropriate gripping pressure for the chosen pan. For calibration and correction purposes, a fixed strip with additional 12 crucible/pan positions is available. Crucible/pan recognition in flight is available. A crucible/pan and lid data base is linked to the ASC. The sample trays are covered by an automatically controlled cover. After closing the cover, the space above the sample pans is purged by branching gas channels integrated in the cover. The purge gas rate is adapted to opening and closing the cover. For this purpose, a further purge gas inlet is available only for the use with the ASC. A “remove lid” function is integrated to cover the sample while waiting its turn to be inserted into the DSC cell. Alternatively, a piercing device is optionally available for piercing the lid prior to measurement. The DSC system has a refuse bin for disposing lids and non-reusable pans. It is possible to archive the micro-plate trays (storage sample). For better identification, the plates have a serial number and 2D code. The tray identification feature is linked to a crucible/lid data base.The same ASC can also be used with our new TG 209 F1 Libra®.

 

To analyze the UV curing of light-sensitive resin systems, adhesives, paints, coatings and dental masses, the DSC 204 F1 Phoenix® can be configured as a Photo-DSC. Standard lamps by a variety of manufacturers can serve as a source of radiation.

For adhesives, we recommend the DELOLUX04 high-pressure mercury lamp (315-500 nm), which can easily be triggered using Proteus® software.
For paints and inks, we recommend the DSC be equipped with an OmniCure® S2000 lamp. The measurement parameters (e.g. exposure time and intensity) can be programmed and monitored by segment via the Proteus® software.
The luminous intensity of the high-pressure mercury lamp can be calibrated with the Radiometer R2000.

 

 

Crucibles

 

Literature

Brochure

Brochure

DSC 204 F1 Phoenix®

DSC 204 F1 Phoenix®

Product brochure: Differential Scanning Calorimetry; Methods, Technique, Applications, 16 pages

Brochure

Thermoelectric Materials

Thermoelectric Materials

Application brochure: "Material Characterization, Phase Changes, Thermal Conductivity", 16 pages

Brochure

Comprehensive Material Characterization

Comprehensive Material Characterization

Application brochure: Research and Development - Substances, Components, Quality Control and Process, Extrusion, Injection Molding, Coating, Quality Assurance - Finished Goods, Material Properties and Main Measuring Methods; 8 pages

Application literature

Application literature

Application Sheet: Specific Heat of Polyethylene

Application Sheet: Specific Heat of Polyethylene

Application literature

Application Sheet: Polyethylene Film (LD/LLD-PE)

Application Sheet: Polyethylene Film (LD/LLD-PE)

Application literature

Application Sheet: Polytetrafluoroethylene (PTFE)

Application Sheet: Polytetrafluoroethylene (PTFE)

Application literature

Application Sheet: Polyethylene LDPE LLDPE HDPE

Application Sheet: Polyethylene LDPE LLDPE HDPE

Show more

Poster

Poster

Thermal Properties of the Elements

Thermal Properties of the Elements

Our poster “Thermal Properties of the Elements” shows the following values at a glance: melting point, boiling point, specific heat, heat of fusion, thermal expansion coefficient, thermal conductivity and density.

Poster

Thermal Properties of Polymers

Thermal Properties of Polymers

Our poster “Thermal Properties of Polymers” offers the following characteristic values at a glance: Glass transition temperature, heat of fusion and melting temperature, decomposition temperature, E modulus, coefficient of thermal expansion, specific heat capacity, thermal conductivity and density.

Textbook

Press

Press

Sample Preparation Simplified

Sample Preparation Simplified

Press

Get to Know Proteus® at K 2016!

Get to Know Proteus® at K 2016!

White Paper

White Paper

Identify for DSC, TGA, DIL, TMA and cP Data

Identify for DSC, TGA, DIL, TMA and cP Data

White Paper

Powerful Database Allows for Polymer Identification by Means of DSC with a Single Click

Powerful Database Allows for Polymer Identification by Means of DSC with a Single Click

Accessories Catalogue

Accessories Catalogue

Accessories for Differential Scanning Calorimeters and Thermobalances

Accessories for Differential Scanning Calorimeters and Thermobalances

Crucibles, Sensors, Sample Carriers, Calibration Kits for DSC, TGA and STA Systems

 

Digital Media

Video

Video

Automatic Sample Changer for the DSC 204 F1 Phoenix®

Designed for routine measurements, it works day and night, giving you time for other tasks, and provides for optimal use of the DSC 204 F1 Phoenix® (e.g. calibrations on the weekend).

(length: 00:27 min)

Video

DSC 204 F1 Phoenix® for Differential Scanning Calorimetry

The versatile premium DSC 204 F1 Phoenix® is based on a unique concept: all of the essential functional modules are integrated into the instrument, and any desired extensions can be added on location at any time. (length: 02:19 min)

NETZSCH DSC204 F1

NETZSCH DSC 204 F1 ASC.flv

NETZSCH DSC 204 F1 Phoenix for Differential Scanning Calorimetry

Webcast

NETZSCH Webinar-Quality improvements in plastic parts through powerful thermo-analytical methods

NETZSCHWebinar-Characterization of Food

NETZSCH Webinar Composites 2015 EN

DSC Analysis of Polymers for Experienced Users

NETZSCH-WebinarKey Thermal Analysis Techniques for Battery Material Development and Testing

NETZSCH-Webinar DSC Analysis of Polymers Basics Applications

NETZSCH-WebinarThermal Analysis Methods Perfect for the Characterization of Wood-Plastic Composites

NETZSCH-Webinar Thermal Analysis Goes Green Applications in the Field of Renewable Energies

 

You may also be interested in:

DSC 204 HP Phoenix® – High-pressure DSC

DSC measurements with selectable gas pressure allow additional possibilities for the study of chemical reactions, vaporization processes (ASTM E1782), adsorption and desorption, and aging studies (ASTM E1858, ASTM D6186, ASTM E2009, ASTM D5483). The DSC 204 HP Phoenix®, Differential Scanning Calorimeter, is ideally configured for these applications.

DSC 214 Polyma

High Performance Smart Measurement AutoEvaluation Innovative Identification Easy Sample Preparation Unique Concavus® Pan

You can use the following software with this product:
Proteus® SoftwareAdvanced Software

 


 

Accessories

 

The DSC 204 F1 Phoenix® is set up for various cooling systems. The entire temperature range from -180°C to 700°C can be covered by different liquid nitrogen cooling devices for LN2 and GN2 operation. A supplement to fill the cooling agent tank without having to dismount the supply system is available. Alternatively, an efficient, economical closed-loop intracooler is available, which operates between -85°C and 600°C. Compressed air cooling via compressor or central supply in the laboratory serves for tests above room temperature.

 

Universal sealing press

 

 

 


 

Software

 

The DSC 204 F1 Phoenix® runs under Proteus® Software on Windows®. The Proteus® Software includes everything you need to carry out a measurement and evaluate the resulting data. Through the combination of easy-to-understand menus and automated routines, a tool has been created that is extremely user-friendly and, at the same time, allows sophisticated analysis. The Proteus® software is licensed with the instrument and can of course be installed on other computer systems.

DSC features:

Determination of onset, peak, inflection and end temperatures    Automatic peak search    Transformation enthalpies: analysis of peak areas (enthalpies) with selectable baseline and partial peak area analysis    Evaluation of crystallization    Comprehensive glass transition analysis    Automatic baseline correction    Specific heat determination    BeFlat® for optimized baselines through a multi-dimensional, temperature and heating rate dependent polynomial    Tau-R® Mode: takes into account the time constant and thermal resistance of the instrument and reveals thus sharper DSC effects from the sample    Optional TM-DSC (temperature modulation) for separation of reversing (thermodynamic) and non-reversing (kinetic) effects    Sector-specific software solutions for conformance to e.g. GLP and GMP

(*) là thông tin bắt buộc
(*)
(*)
(*)
Donaldbar
29/03/2024 05:05:19
Мы специализируемся на имплантации и знаем, как важно избежать травматиченого удаления https://sundent.ru/uslugi/lechenie-zubov/endodonticheskoe-lechenie/ Если костную ткань не сберечь, то ее окажется недостаточно для надежной установки импланта https://sundent.ru/novosti/ Придётся восстанавливать целость и о
MarcusCaf
29/03/2024 05:03:11
Интернет-магазин Самоделкин предлагает широкий ассортимент недорогих запчастей к различной технике бытового назначения https://zapchasti-remont.ru/shop/krepej_i_oblitsovka/ У нас можно купить как новые, так и детали с разборки https://zapchasti-remont.ru/shop/reduktoryi1/ Неважно, какая техника у вас слома
WilliamRop
29/03/2024 05:01:33
Эта постройка изготовлена из фанеры, закрепленной к каркасу из бруса сечением 50х50мм https://chisteam.ru/catalog/proce/tortsevaya_zaglushka_dlya_lotka_vodootvodnogo_gidrolica_light_plastikovaya/ Для кровли подойдет любой недорогой материал, например, пара листов ондулина https://chisteam.ru/catalog/reshetchatyy_nastil/kompozitnyy_reshetchatyy_nastil_terra_gra
Felipeabext
29/03/2024 04:53:57
Окна и фурнитура https://touringcars-russia.ru/tour_1/tour.html Hobby De Luxe 495 UL https://touringcars-russia.ru/tour_1/tour.html Keystone Premier https://touringcars-russia.ru/tour_1/tour.html 17 марта 2022 г https://touringcars-russia.ru/tour_2/tour.html в 04:20 https://touringcars-russia.ru/tour_2/tour.html Вода, газ, электричество https://touringcars-russia.ru/tour_1/tour.html Интересно, что современный
RobertJeday
29/03/2024 04:52:32
Обратите внимание, что не во всех местах есть возможность организовать полноценное мероприятие и пригласить много гостей https://www.virgo-show.com/videos Но если у вас небольшая компания, можно просто прийти позагорать и поплавать, сыграть в пляжный волейбол, отдохнуть у воды и выпить
The System Solution for Efficient Characterization of Polymers
0 VNĐ
EPLEXOR Series Up to ±500 N
0 VNĐ
The vacuum-tight thermo-microbalance for highest demands
0 VNĐ
0 VNĐ
0 VNĐ
0 VNĐ
0 VNĐ
0 VNĐ
0 VNĐ
0 VNĐ
0 VNĐ
0 VNĐ